TECHNOLOGY | |
Topology | Triaxial, horizontal-vertical |
Feedback | Force balance with capacitive displacement transducer |
Centering | Automated electronic offset zeroing, can be remotely initiated |
PERFORMANCE | |
Full Scale Range | Electronically selectable range:
+/-4g, +/-2g, +/-1g, +/-0.5g, +/-0.25g (peak) Independent vertical, horizontal range selection |
Sensitivity | 5 V/g, 10V/g, 20V/g, 40V/g, 80V/g
Depending on selected full scale range |
Bandwidth | DC to 430Hz |
Dynamic Range | 166dB @ 1Hz over 1Hz bandwidth |
(Integrated RMS) | 155 dB, 3 to 30Hz |
Offset | Electronically zeroed to within +/- 0.005g |
Non-Linearity | <0.015% Total Non-Linearity |
Hysteresis | <0.005% of full scale |
Cross-Axis Sensitivity | <1% (including misalignment) |
Offset Temperature | 60 micro-g/°C, typical, Horizontal Sensor |
Coefficient | 320 micro-g/°C, typical, Vertical Sensor |
INTERFACE | |
Connector | 14-pin, shell size 12, MIL-C-26482 Series I 40 V peak-to-peak differential XYZ mode |
Acceleration Output | Single voltage input and one active high control signal to enable all 3 channels |
Calibration Input | Configurable input pin for Auto-Zero/Self-test/Calibration enable |
Control Inputs | Asserted: Unit OK, output signal valid |
Status Output | Deasserted: Self-test in progress or failed, auto zeroing in progress, or starting up |
DIGITAL COMMAND AND CONTROL INTERFACE | |
Digital Interface | RS-232 compatible serial IP (SLIP)
Onboard web server standard HTTP |
Digital Commands | Gain Range selection
Auto-zero, or set to specific offset Self-test Calibration enable Firmware updates State-of-health request |
Digital Data Outputs | Sampled XYZ outputs (in Volts and g)
Instrument temperature Trimmer settings Hardware assemblies Instrument serial number and firmware revision |
POWER | |
Supply Voltage | 9-36 V DC isolated input |
Power Consumption | 1.1W typical quiescent |
Protection | Reverse-voltage and over-voltage protected
Self-resetting over-current protection |
ENVIRONMENT | |
Humidity | 0-100% |
Operating Temp | -40°C to +60°C |
Storage Temp | -65°C to +75°C |
Protection | Reverse-voltage and over-voltage protected |
PHYSICAL CHARACTERISTICS | |
Size | 14 cm (L) x 8.5 cm (W) x 5.8 CM (H)
5.5”(L) x 3.3”(W) x 2.3” (H) |
Weight | 920g (2.1 lb) |
Housing | Aluminum, surface resistant to corrosion, scratches and chips |
Mounting | Single bolt keyhole mount |
Leveling | Integrated bubble level, adjustable locking leveling screws |
Weather Resistance | Rated to IP-67 |
Specifications subject to change without notice